AEROSPACE MATERIAL SPECIFICATION Passivation Treatments for Corrosion-Resistant Steel. AMS-QQ-P-35 AEROSPACE MATERIAL Issued MAY 1998 400 Commonwealth Drive, Warrendale, PA 15096-0001 SPECIFICATION Submitted for recognition as an American National Standard Passivation Treatments for Corrosion-Resistant Steel NOTICE This document has been taken directly from U.S. Military Specification AEROSPACE AMS-STD-2154 MATERIAL SPECIFICATION level, and (b) the use of the existing government specification or standard format. Any material relating to qualified product lists has not been adopted by SAE. This material was part of the original military specification and is reprinted here for historic reference only. AEROSPACE MATERIAL SPECIFICATION AMS-STD-2154 Issued MAR 1998
AEROSPACE MATERIAL SPECIFICATION Issued. AMS2406 REV. N . 1946-11 Revised 2015-01 . Superseding AMS2406M. Plating, Chromium Hard Deposit . RATIONALE . AMS2406N changes the hydrogen embrittlement relief requirement to the standard wording of 40 HRC for use with AEROSPACE MATERIAL SPECIFICATION - antpediaAEROSPACE MATERIAL SPECIFICATION AMS-QQ-C-320 Issued JUL 2000 Chromium Plating (Electrodeposited) NOTICE This document has been taken directly from U.S. Military Specification QQ-C-320B, Amendment 4 and contains only minor editorial and format changes required to bring it into conformance with the publishing requirements of SAE technical standards. AEROSPACE MATERIAL SPECIFICATION - antpediaform a part of the specification to the extent specified herein. AEROSPACE MATERIAL SPECIFICATION SAE Technical Standards Board Rules provide that:This report is published by SAE to advance the state of technical and engine ering sciences. The use of this report is
AEROSPACE PART NUMBER CROSS-REFERENCE Industry Standard Part Number Freudenberg Sealing Technologies Part Number Material Specification MS9387-YY Inquire, some parts are tight tolerance V75 AMS-R-83248, MIL-R-83248, or M83248/1 (superseded by AS83248/1) AS9966-YY* Inquire, parts over 0.500" ID are tight tolerance F273 AMS7273 AMS Standard Color Chart AMS-STD-595-COLORAMS STANDARD 595A COLOR. Standard Colors Used in U.S. Government Procurement. Aerospace Material Specification - Standard 595A. The Color Standard AMS Standard 595 is since 2014 issued by the US Government General Services Administration (GSA/SAE). The standard defines a color index system used by, but not limited to, government activities in a format suitable for color identification, Aerospace Engineering Standards SAE MOBILUSSAE Aerospace Material Specifications (AMS) cover materials, material tolerances, and quality control procedures and processes.
Apr 14, 2020 · Those who are familiar with aerospace heat treating are accustomed to Aerospace Material Specifications (AMS) that guide heat treaters on how to process parts and raw materials. These specifications will mandate equipment requirements, atmospheres to be used, cleaning methods, soaking times and temperatures, and testing requirements, to name a few. New, revised, reaffirmed, stabilized, and cancelled SAE New Standards. New, Revised, Reaffirmed, Stabilized, and Cancelled SAE Aerospace Material Specifications. Click on the document number to find out more or to order online! Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa) SAE AMS INDEX - AEROSPACE MATERIAL SPECIFICATIONS AEROSPACE MATERIAL SPECIFICATIONS INDEX. A description is not available for this item. SAE AMS INDEX. AEROSPACE MATERIAL SPECIFICATIONS INDEX. A description is not available for this item. SAE AMS INDEX. AEROSPACE MATERIAL SPECIFICATIONS INDEX. A description is not available for this item. View Less.
AMS Aerospace Material Specifications specific performance requirements for material and process specifications ARP Aerospace Recommended Practices documentations of practice, procedures, and technology that are intended as guides to standard engineering practices. May be of a Understanding Aerospace Materials:AMS Specifications AMS specifications are compiled in a comprehensive database of individual directives that standardize procedures, equipment and processes related to aerospace material processing. These are continuously updated and revised to stay up-to-date with advances in material Section D Material Selection Process Aerospace Aerospace Material Specification (AMS) Reference Yield Strength, Relaxation & Springback Material (Common Designation) Strip & Sheet Tubing Wire C-Rings, E-Rings, U-Rings O-Rings Wire Rings Springs 304 Stainless Steel AMS 5511 AMS 5560, 5565 AMS 5697 AMS 5857 316 Stainless Steel AMS 5584 AMS 5690 17-4 PH Stainless Steel Monel 400 AMS 4574 AMS 4730